Avstånd mellan muffarna

[JJ]

Någon som har avståndet mellan muffarna på en internationell skivstång? Pedagogisk bild nedan:
http://i2.tinypic.com/t70v3o.jpg

[HajduMan]

muff varannan dag

[Nitrometan]

Från IPF:s regelbok:
(a) The bar shall be straight and well knurled and grooved and shall conform to the following
dimensions :
1. Total overall length not to exceed 2.2 m.
2. Distance between the collar faces is not to exceed 1.32 m or be less than 1.31 m.
3. Diameter of the bar is not to exceed 29 mm or be less than 28 mm.
4. Weight of the bar and collars is to be 25 kg.
5. Diameter of the sleeve not to exceed 52 mm or be less than 50 mm.
6. There shall be a diameter machined marking or the bar taped so as to measure 81 cm between marking or tape.


Så enligt punkt 2 ska det vara mellan 131 och 132 cm.

Här finns reglerna (http://www.powerlifting-ipf.com/ipf_technical_rulebook.htm).

[JJ]

Från IPF:s regelbok:
(a) The bar shall be straight and well knurled and grooved and shall conform to the following
dimensions :
1. Total overall length not to exceed 2.2 m.
2. Distance between the collar faces is not to exceed 1.32 m or be less than 1.31 m.
3. Diameter of the bar is not to exceed 29 mm or be less than 28 mm.
4. Weight of the bar and collars is to be 25 kg.
5. Diameter of the sleeve not to exceed 52 mm or be less than 50 mm.
6. There shall be a diameter machined marking or the bar taped so as to measure 81 cm between marking or tape.


Så enligt punkt 2 ska det vara mellan 131 och 132 cm.

Här finns reglerna (http://www.powerlifting-ipf.com/ipf_technical_rulebook.htm).

Vielen dank, mein liebchen!